Notes

Slide Show

Outline

1	Mopar BOV Conversion kit Walk Through.
2	"This is one of my..." This is one of my favorite mods so far. it is easy, inexpensive, and sounds really cool. This is to help those that may have some trouble installing your kit. Just take it step by step and you shouldn’t have too much of a problem installing it. If you need any more assistance, email me at mopar1@mailcity.com or go to www.srtforums.com and you can message me there. DaytonaGTS is my screen name. GOOD LUCK, and have fun.
3
4
5
6
7
8
9
10
11
12
13
14	"Start putting all bolts back..." Start putting all bolts back in the same way you took them out. Just be patient with the back bolt it may be a little tight. Make the bolts snug, but not too tight. Put the vacuum line back on the BOV. Reconnect any lines that you might have disconnected to get to the back bolt. Reconnect the air intake and screw the hose clamps back tight.
15